[
  {
    "numero": "1",
    "nome": "ANT",
    "tipo": "analog",
    "funcoes": [
      "Connexion de l'antenne RF (Wi-Fi et Bluetooth)"
    ],
    "categorias": [
      "Antenne",
      "RF"
    ],
    "avisos": [
      "Broche RF dédiée. Évitez les pistes longues ou sans adaptation d'impédance de 50 ohms."
    ]
  },
  {
    "numero": "2",
    "nome": "VDDA3P3",
    "tipo": "power",
    "funcoes": [
      "Alimentation analogique 3.3V"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Tension recommandée : 3.3V (3.0V à 3.6V)",
      "Alimente les circuits analogiques et RF de la puce"
    ]
  },
  {
    "numero": "3",
    "nome": "VDDA3P3",
    "tipo": "power",
    "funcoes": [
      "Alimentation analogique 3.3V"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Tension recommandée : 3.3V (3.0V à 3.6V)",
      "Alimente les circuits analogiques et RF de la puce"
    ]
  },
  {
    "numero": "4",
    "nome": "GPIO0",
    "tipo": "io",
    "funcoes": [
      "GPIO0",
      "ADC1_CH0"
    ],
    "categorias": [
      "GPIO",
      "ADC"
    ],
    "avisos": [
      "Broche d'entrée analogique ADC1 Canal 0"
    ]
  },
  {
    "numero": "5",
    "nome": "GPIO1",
    "tipo": "io",
    "funcoes": [
      "GPIO1",
      "ADC1_CH1"
    ],
    "categorias": [
      "GPIO",
      "ADC"
    ],
    "avisos": [
      "Broche d'entrée analogique ADC1 Canal 1"
    ]
  },
  {
    "numero": "6",
    "nome": "GPIO2",
    "tipo": "io",
    "funcoes": [
      "GPIO2",
      "ADC1_CH2",
      "FSPIQ"
    ],
    "categorias": [
      "GPIO",
      "ADC",
      "SPI"
    ],
    "avisos": [
      "Mappé sur la fonction SPI MISO (FSPIQ) par défaut lors de l'initialisation de la flash"
    ]
  },
  {
    "numero": "7",
    "nome": "CHIP_EN",
    "tipo": "analog",
    "funcoes": [
      "Activation de la puce (Power-up / Reset)"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Actif à l'état haut. Tirez au niveau haut pour initialiser la puce.",
      "Ne laissez pas cette broche flottante. Utilisez un circuit de retard RC externe pour un démarrage stable."
    ]
  },
  {
    "numero": "8",
    "nome": "GPIO3",
    "tipo": "io",
    "funcoes": [
      "GPIO3",
      "ADC1_CH3"
    ],
    "categorias": [
      "GPIO",
      "ADC"
    ],
    "avisos": [
      "Broche d'entrée analogique ADC1 Canal 3"
    ]
  },
  {
    "numero": "9",
    "nome": "GPIO4",
    "tipo": "io",
    "funcoes": [
      "GPIO4",
      "MTMS",
      "FSPIQ",
      "ADC1_CH4"
    ],
    "categorias": [
      "GPIO",
      "JTAG",
      "SPI",
      "ADC"
    ],
    "avisos": [
      "Broche multifonction : JTAG MTMS, SPI2 MISO et ADC1 Canal 4.",
      "Peut être utilisée pour le débogage JTAG conjointement avec les autres broches JTAG."
    ]
  },
  {
    "numero": "10",
    "nome": "GPIO5",
    "tipo": "io",
    "funcoes": [
      "GPIO5",
      "MTDI",
      "FSPIWP"
    ],
    "categorias": [
      "GPIO",
      "JTAG",
      "SPI"
    ],
    "avisos": [
      "Broche multifonction : JTAG MTDI et SPI2 Write Protect (FSPIWP)."
    ]
  },
  {
    "numero": "11",
    "nome": "VDD3P3_RTC",
    "tipo": "power",
    "funcoes": [
      "Alimentation du domaine RTC et des E/S basse consommation"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Tension recommandée : 3.3V"
    ]
  },
  {
    "numero": "12",
    "nome": "GPIO6",
    "tipo": "io",
    "funcoes": [
      "GPIO6",
      "MTCK",
      "FSPICLK"
    ],
    "categorias": [
      "GPIO",
      "JTAG",
      "SPI"
    ],
    "avisos": [
      "Broche multifonction : JTAG MTCK et horloge SPI2 (FSPICLK)."
    ]
  },
  {
    "numero": "13",
    "nome": "GPIO7",
    "tipo": "io",
    "funcoes": [
      "GPIO7",
      "MTDO",
      "FSPID"
    ],
    "categorias": [
      "GPIO",
      "JTAG",
      "SPI"
    ],
    "avisos": [
      "Broche multifonction : JTAG MTDO et SPI2 MOSI (FSPID)."
    ]
  },
  {
    "numero": "14",
    "nome": "GPIO8",
    "tipo": "io",
    "funcoes": [
      "GPIO8"
    ],
    "categorias": [
      "GPIO",
      "Strapping"
    ],
    "avisos": [
      "Broche de strapping pour le contrôle du démarrage (boot).",
      "En association avec GPIO9, sélectionne le mode de démarrage du SoC (doit être à 1 pendant le reset pour le Joint Download Boot si GPIO9=0)."
    ]
  },
  {
    "numero": "15",
    "nome": "GPIO9",
    "tipo": "io",
    "funcoes": [
      "GPIO9"
    ],
    "categorias": [
      "GPIO",
      "Strapping"
    ],
    "avisos": [
      "Broche de strapping principale. Niveau haut (1) au reset active le boot SPI (par défaut via pull-up faible).",
      "Niveau bas (0) au reset place la puce en mode téléchargement (Download) UART/SPI."
    ]
  },
  {
    "numero": "16",
    "nome": "GPIO10",
    "tipo": "io",
    "funcoes": [
      "GPIO10",
      "FSPICS0"
    ],
    "categorias": [
      "GPIO",
      "SPI"
    ],
    "avisos": [
      "Broche multifonction : SPI2 Chip Select 0 (FSPICS0)."
    ]
  },
  {
    "numero": "17",
    "nome": "VDD3P3_CPU",
    "tipo": "power",
    "funcoes": [
      "Alimentation numérique du CPU et des E/S correspondantes (3.3V)"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Tension recommandée : 3.3V"
    ]
  },
  {
    "numero": "18",
    "nome": "GPIO18",
    "tipo": "io",
    "funcoes": [
      "GPIO18"
    ],
    "categorias": [
      "GPIO"
    ],
    "avisos": []
  },
  {
    "numero": "19",
    "nome": "GPIO19",
    "tipo": "io",
    "funcoes": [
      "GPIO19",
      "U0RXD"
    ],
    "categorias": [
      "GPIO",
      "UART"
    ],
    "avisos": [
      "UART0 receive pin (Serial RX by default for flashing and monitoring)."
    ]
  },
  {
    "numero": "20",
    "nome": "GPIO20",
    "tipo": "io",
    "funcoes": [
      "GPIO20",
      "U0TXD"
    ],
    "categorias": [
      "GPIO",
      "UART"
    ],
    "avisos": [
      "UART0 transmit pin (Serial TX by default for flashing and monitoring)."
    ]
  },
  {
    "numero": "21",
    "nome": "VDDA",
    "tipo": "power",
    "funcoes": [
      "Alimentation d'entrée analogique 3.3V"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": []
  },
  {
    "numero": "22",
    "nome": "XTAL_N",
    "tipo": "analog",
    "funcoes": [
      "Connexion externe du quartz oscillateur (Sortie)"
    ],
    "categorias": [
      "Clock"
    ],
    "avisos": []
  },
  {
    "numero": "23",
    "nome": "XTAL_P",
    "tipo": "analog",
    "funcoes": [
      "Connexion externe du quartz oscillateur (Entrée)"
    ],
    "categorias": [
      "Clock"
    ],
    "avisos": []
  },
  {
    "numero": "24",
    "nome": "VDDA",
    "tipo": "power",
    "funcoes": [
      "Alimentation d'entrée analogique 3.3V"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": []
  },
  {
    "numero": "25",
    "nome": "GND",
    "tipo": "power",
    "funcoes": [
      "Plot de masse central (Exposed Pad)"
    ],
    "categorias": [
      "Power"
    ],
    "avisos": [
      "Doit être correctement soudé au plan de masse (GND) du circuit imprimé pour des performances stables et une bonne dissipation thermique."
    ]
  }
]