feat(i18n): zh-CN examples log in English, matching the serial-monitor convention

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>

public/exemplos/zh-CN/arduino.ino

@@ -18,8 +18,8 @@ void setup() {
   }
 
   Serial.println("");
-  Serial.println("Wi-Fi conectado com sucesso!");
+  Serial.println("Wi-Fi connected!");
-  Serial.print("Endereço IP: ");
+  Serial.print("IP address: ");
   Serial.println(WiFi.localIP());
 }
 

public/exemplos/zh-CN/esp-adf.c

@@ -57,7 +57,7 @@ void app_main(void)
     audio_element_set_uri(fatfs_stream_reader, "/sdcard/test.mp3");
 
     // 启动流水线
-    ESP_LOGI(TAG, "Iniciando pipeline...");
+    ESP_LOGI(TAG, "Starting pipeline...");
     audio_pipeline_run(pipeline);
 
     // 保持流水线运行

public/exemplos/zh-CN/esp-dsp.c

@@ -12,7 +12,7 @@ void app_main(void)
     // 初始化 ESP-DSP
     esp_err_t ret = dsps_fft2r_init_fc32(NULL, CONFIG_DSP_MAX_FFT_SIZE);
     if (ret != ESP_OK) {
-        printf("Erro ao inicializar o ESP-DSP!\n");
+        printf("Failed to initialize ESP-DSP!\n");
         return;
     }
 

public/exemplos/zh-CN/esp-idf.c

@@ -46,8 +46,8 @@ void app_main(void)
     esp_chip_info(&chip_info);
 
     ESP_LOGI(TAG, "===========================================");
-    ESP_LOGI(TAG, "  Iniciando ESP-IDF v5.x Modern Application ");
+    ESP_LOGI(TAG, "  Starting ESP-IDF v5.x Modern Application ");
-    ESP_LOGI(TAG, "  Modelo do Chip: %d | Núcleos: %d | Rev: %d", 
+    ESP_LOGI(TAG, "  Chip model: %d | Cores: %d | Rev: %d", 
              chip_info.model, chip_info.cores, chip_info.revision);
     ESP_LOGI(TAG, "===========================================");
 

public/exemplos/zh-CN/esp-iot-solution.c

@@ -31,13 +31,13 @@ static void button_single_click_cb(void *arg, void *data)
 /* 长按回调（> 3 秒） */
 static void button_long_press_cb(void *arg, void *data)
 {
-    ESP_LOGW(TAG, "Evento: Pressionamento Longo! Acionando modo de reset de fábrica.");
+    ESP_LOGW(TAG, "Event: long press! Entering factory reset mode.");
     led_indicator_start(led_handle, BLINK_BREATHE_FAST);
 }
 
 void app_main(void)
 {
-    ESP_LOGI(TAG, "Iniciando ESP-IoT-Solution Component Suite");
+    ESP_LOGI(TAG, "Starting ESP-IoT-Solution Component Suite");
 
     // 1. LED Indicator 配置
     led_indicator_gpio_config_t led_cfg = {
@@ -64,7 +64,7 @@ void app_main(void)
     iot_button_register_cb(btn_handle, BUTTON_SINGLE_CLICK, button_single_click_cb, NULL);
     iot_button_register_cb(btn_handle, BUTTON_LONG_PRESS_START, button_long_press_cb, NULL);
 
-    ESP_LOGI(TAG, "Drivers inicializados com sucesso! Pressione o botão GPIO 0.");
+    ESP_LOGI(TAG, "Drivers initialized! Press the button on GPIO 0.");
 
     while (1) {
         vTaskDelay(pdMS_TO_TICKS(1000));

public/exemplos/zh-CN/esp-matter.c

@@ -15,7 +15,7 @@ void app_event_cb(const esp_matter_event_t *event)
                 bool on = false;
                 esp_matter_attribute_get(attr_update->endpoint_id, attr_update->cluster_id,
                                          attr_update->attribute_id, &on);
-                ESP_LOGI(TAG, "Lâmpada %s", on ? "ligada" : "desligada");
+                ESP_LOGI(TAG, "Lamp %s", on ? "on" : "off");
             }
             break;
         }
@@ -40,5 +40,5 @@ void app_main(void)
     // 启动 Matter 协议栈
     ESP_ERROR_CHECK(esp_matter::start(node));
 
-    ESP_LOGI(TAG, "Dispositivo Matter iniciado. Aguardando comissionamento...");
+    ESP_LOGI(TAG, "Matter device started. Waiting for commissioning...");
 }

public/exemplos/zh-CN/esp-now.c

@@ -30,7 +30,7 @@ static const uint8_t broadcast_mac[ESP_NOW_ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF,
 /* 发送数据包时执行的回调 */
 static void on_data_sent(const uint8_t *mac_addr, esp_now_send_status_t status)
 {
-    ESP_LOGI(TAG, "Envio concluído: %s", status == ESP_NOW_SEND_SUCCESS ? "SUCESSO (ACK)" : "FALHA");
+    ESP_LOGI(TAG, "Send complete: %s", status == ESP_NOW_SEND_SUCCESS ? "SUCCESS (ACK)" : "FAILURE");
 }
 
 /* 接收其他 ESP32 数据包时执行的回调 */
@@ -70,7 +70,7 @@ void app_main(void)
     memcpy(peer_info.peer_addr, broadcast_mac, ESP_NOW_ETH_ALEN);
     ESP_ERROR_CHECK(esp_now_add_peer(&peer_info));
 
-    ESP_LOGI(TAG, "ESP-NOW pronto! Enviando telemetria a cada 3 segundos...");
+    ESP_LOGI(TAG, "ESP-NOW ready! Sending telemetry every 3 seconds...");
 
     dados_pacote_t telemetria = {
         .sensor_id = 101,
@@ -84,7 +84,7 @@ void app_main(void)
 
         esp_err_t res = esp_now_send(broadcast_mac, (uint8_t *)&telemetria, sizeof(telemetria));
         if (res != ESP_OK) {
-            ESP_LOGE(TAG, "Erro ao disparar envio ESP-NOW: %d", res);
+            ESP_LOGE(TAG, "Failed to send ESP-NOW packet: %d", res);
         }
 
         vTaskDelay(pdMS_TO_TICKS(3000));

public/exemplos/zh-CN/esp-rainmaker.c

@@ -56,7 +56,7 @@ void app_main(void)
     esp_rmaker_node_t *node = esp_rmaker_node_init(&rainmaker_cfg, "ESP32_SmartSwitch", "Switch");
     
     // 创建默认的 'Switch' 设备
-    switch_device = esp_rmaker_switch_device_create("Luz Sala", NULL, true);
+    switch_device = esp_rmaker_switch_device_create("Living Room Light", NULL, true);
     
     // 注册写回调
     esp_rmaker_device_add_cb(switch_device, write_cb, NULL);
@@ -72,5 +72,5 @@ void app_main(void)
     // 通过 BLE 启动 Wi-Fi 配网（在官方 RainMaker 应用中打开）
     app_wifi_start(POP_TYPE_RANDOM);
 
-    ESP_LOGI(TAG, "Nó RainMaker pronto! Escaneie o QR Code no app ESP RainMaker.");
+    ESP_LOGI(TAG, "RainMaker node ready! Scan the QR code in the ESP RainMaker app.");
 }

public/exemplos/zh-CN/esp-sr.c

@@ -46,7 +46,7 @@ void speech_recognition_task(void *arg)
     const esp_mn_iface_t *multinet = &ESP_MN_HANDLE;
     model_iface_data_t *model_data = multinet->create(&MULTINET_MODEL, 6000);
 
-    ESP_LOGI(TAG, "Aguardando palavra-chave de ativação (ex: 'Hi, ESP')...");
+    ESP_LOGI(TAG, "Waiting for the wake word (e.g. 'Hi, ESP')...");
 
     while (1) {
         afe_fetch_result_t *res = afe_handle->fetch(afe_data);
@@ -69,9 +69,9 @@ void speech_recognition_task(void *arg)
                 
                 // 操作示例
                 if (mn_res->command_id[0] == 1) {
-                    ESP_LOGI(TAG, "Ação: Ligar Luz da Sala");
+                    ESP_LOGI(TAG, "Action: turn on the living room light");
                 } else if (mn_res->command_id[0] == 2) {
-                    ESP_LOGI(TAG, "Ação: Desligar Luz da Sala");
+                    ESP_LOGI(TAG, "Action: turn off the living room light");
                 }
             } else if (mn_state == ESP_MN_STATE_TIMEOUT) {
                 ESP_LOGI(TAG, "Tempo esgotado. Retornando ao modo de escuta de Wake Word.");
@@ -83,7 +83,7 @@ void speech_recognition_task(void *arg)
 
 void app_main(void)
 {
-    ESP_LOGI(TAG, "Iniciando ESP-SR Speech Recognition Engine");
+    ESP_LOGI(TAG, "Starting ESP-SR Speech Recognition Engine");
 
     // 配置音频前端流水线（AEC、BSS、VAD、WakeNet）
     afe_config_t afe_config = AFE_CONFIG_DEFAULT();

public/exemplos/zh-CN/esp-who.c

@@ -11,7 +11,7 @@
 void setup() {
     Serial.begin(115200);
     Serial.setDebugOutput(true);
-    Serial.println("Iniciando câmera...");
+    Serial.println("Starting camera...");
 
     camera_config_t config;
     config.ledc_channel = LEDC_CHANNEL_0;
@@ -38,17 +38,17 @@ void setup() {
     config.fb_count = 1;
 
     if (esp_camera_init(&config) != ESP_OK) {
-        Serial.println("Falha ao iniciar a câmera!");
+        Serial.println("Failed to start camera!");
         return;
     }
 
-    Serial.println("Câmera inicializada com sucesso!");
+    Serial.println("Camera initialized!");
 }
 
 void loop() {
     camera_fb_t *fb = esp_camera_fb_get();
     if (!fb) {
-        Serial.println("Falha ao capturar imagem!");
+        Serial.println("Failed to capture image!");
         return;
     }
 

public/exemplos/zh-CN/esp-zigbee.c

@@ -25,7 +25,7 @@ static esp_err_t zb_attribute_handler(const esp_zb_zcl_set_attr_value_message_t
         if (message->attribute.id == ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID &&
             message->attribute.data.type == ESP_ZB_ZCL_ATTR_TYPE_BOOL) {
             bool on_off_state = message->attribute.data.value ? *(bool *)message->attribute.data.value : false;
-            ESP_LOGW(TAG, ">>> COMANDO ZIGBEE RECEBIDO: Lâmpada %s", on_off_state ? "LIGADA" : "DESLIGADA");
+            ESP_LOGW(TAG, ">>> COMANDO ZIGBEE RECEBIDO: Lamp %s", on_off_state ? "ON" : "OFF");
         }
     }
     return ESP_OK;
@@ -40,12 +40,12 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_msg_t *signal_msg)
 
     switch (sig_type) {
     case ESP_ZB_ZDO_SIGNAL_SKIP_STARTUP:
-        ESP_LOGI(TAG, "Iniciando comissionamento na rede Zigbee...");
+        ESP_LOGI(TAG, "Starting commissioning on the Zigbee network...");
         esp_zb_bdb_start_top_level_commissioning(ESP_ZB_BDB_MODE_NETWORK_STEERING);
         break;
     case ESP_ZB_BDB_SIGNAL_STEERING:
         if (err_status == ESP_OK) {
-            ESP_LOGI(TAG, "Conectado com sucesso à rede Zigbee 3.0!");
+            ESP_LOGI(TAG, "Connected to the Zigbee 3.0 network!");
         } else {
             ESP_LOGW(TAG, "Buscando coordenador Zigbee novamente...");
             esp_zb_scheduler_alarm((esp_zb_callback_t)esp_zb_bdb_start_top_level_commissioning, ESP_ZB_BDB_MODE_NETWORK_STEERING, 1000);

public/exemplos/zh-CN/rust-esp.rs

@@ -42,7 +42,7 @@ fn main() -> ! {
         led.toggle();
         counter += 1;
 
-        println!("Ciclo Rust #{}: LED está {:?}", counter, led.is_set_high());
+        println!("Rust cycle #{}: LED is {:?}", counter, led.is_set_high());
         delay.delay_millis(500);
     }
 }